| Processors NOTE: One of the following depending on Model | Dual-core procesors: - Dual-core Intel Xeon 2.8 GHz/800MHz -2x2M L2 cache processor
Single-core processors: - Intel Xeon Processor 3.8 GHz/800MHz -2MB L2 cache processor
- Intel Xeon Processor 3.6 GHz/800MHz -2MB L2 cache processor
- Intel Xeon Processor 3.6 GHz/800MHz -1MB L2 cache processor
- Intel Xeon Processor 3.4 GHz/800MHz -2MB L2 cache processor
- Intel Xeon Processor 3.4 GHz/800MHz -1MB L2 cache processor
- Intel Xeon Processor 3.2 GHz/800MHz -2MB L2 cache processor
- Intel Xeon Processor 3.2 GHz/800MHz -1MB L2 cache processor
- Intel Xeon Processor 3.0 GHz/800MHz -2MB L2 cache processor
- Intel Xeon Processor 3.0 GHz/800MHz -2MB L2 cache, Low Voltage processor
- Intel Xeon Processor 2.8 GHz/800MHz -2MB L2 cache processor
|
| Cache Memory NOTE: One of the following depending on Model | - 2 x 2 MB Level 2 cache (Dual-core Models)
|
Front-Side Bus | 800 MHz Front Side Bus |
Upgradability | Upgradeable to dual processing |
Chipset | Intel E7520 Chipset |
| Memory NOTE: One of the following depending on model | Type | PC2-3200R 400 MHz DDR2 | Standard (base models) | 1 GB (2 x 512 MB) | Standard (High Performance models) | 2 GB (2 x 1024 MB) | Maximum | 12 GB |
|
Network Controller | Embedded NC7782 PCI-X Gigabit Server Adapter |
Expansion Slots | Slot Type | Slot Number | Bus Speed | Bus Number | Device Number | Hot Plug | PCI Voltage |
|---|
| PCI-X Non Hot-Plug Riser Expansion Slots NOTE: Universal cards are supported | 1 | 64-bit/133MHz PCI-X | 10 | 1 | no | 3.3 Volt | 2 | 64-bit/100MHz PCI-X | 6 | 1 | no | 3.3 Volt | 3 | 64-bit/100MHz PCI-X | 6 | 2 | no | 3.3 Volt | | PCI-X Hot Plug Riser (Optional) NOTE: Universal cards are supported | 1 | 64-bit/133MHz PCI-X | 10 | 1 | no | 3.3 Volt | 2 | 64-bit/100MHz PCI-X | 6 | 1 | yes | 3.3 Volt | 3 | 64-bit/100MHz PCI-X | 6 | 2 | yes | 3.3 Volt | PCI Express Non-Hot Plug Riser (Optional) | 1 | PCI Express x4 | 8 | 0 | no | NA | 2 | PCI Express x4 | 5 | 0 | no | NA |
NOTE: x8 cards are supported but will run at x4 speeds. NOTE: Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number. NOTE: Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus). |
Storage Controller | Smart Array 6i Controller (integrated on system board) OR Smart Array P600 with 256 MB battery-backed write cache (SAS Models) |
Storage | - None Standard
NOTE: The system can be operated in single channel or dual channel (2/4 split). SCSI configuration kit (364471-B21) is required for dual channel configurations.
|
Maximum Internal Storage Type | Hot Plug U320 SCSI | 1.8 TB | 6 x 300 GB with standard internal hot plug SCSI drive cage | Hot Plug SAS | 1.168 TB | 8 x 146 GB with standard internal hot plug small form factor SAS drive cage |
|
Interfaces | - USB - Three (one front, two back)
|
Graphics | Integrated ATI RAGE XL Video Controller with 8 MB SDRAM Video Memory |
Form Factor | Rack (2U), (3.5-inch) |
Industry Standard Compliance | |
Remote Management | Integrated Lights Out (iLO) Standard Management: |
Intelligent Manageability | - Hot Spare Boot
NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will automatically reboot and use the remaining good processor(s).
|
Server Power Cords | One Lowline NEMA power cord and One Highline IEC Power cord ships standard |
Power Supply | |
System Fans | Five hot plug fans ship standard. Eight hot plug fans total supported internally for full redundancy NOTE: The additional three fans are available via Redundant Fan Option Kit (PN 293048-B21). |
Required Cabling | For required cabling information, refer to the Web site at: http://h18000.www1.hp.com/products/servers/proliantDL380/ |
Rack Kit | The DL380 quick deploy rail system provides tool-free support for racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24 - 36 inches. The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management. NOTE: Cable management arm must be removed to access hot-plug power supplies when the cable management arm is mounted on the right. |
hpat360
